Việt Nam
Watertec 6 order in TP. Hồ Chí Minh   on Việt
  • Русский
  • Українська
  • English
  • Français
  • Español
  • Italiano
  • Portuguesa
  • Română
  • Magyar
  • العربية
  • زبان_فارسی
  • 汉语
  • 日本語
  • 한국어
  • Nederlands
  • Ελληνικά
  • Suomi
  • עברית
  • Norsk
  • Svenska
Ngoại tệ VND
Watertec 6 order in TP. Hồ Chí Minh   on Việt
Đặt hàng Watertec 6
Watertec 6

Watertec 6

Chỉ định giá từ người bán
Việt Nam, TP. Hồ Chí Minh
Hiển thị số điện thoại
Mô tả
Watertec 6 is a high performance lightweight rotary water well drilling rig for conventional open hole drilling using mud, air or water flushing techniques and with down the hole (DTH) hammer, coring and augering capability. This water drilling rig is highly manoeuvrable, simple to position and very easy to operate.

Carrier Vehicle: 4x4 heavy duty truck , new or used. Dual axle trailer or track laying vehicle.

Power Unit: 80HP 6 cylinder diesel engine.

Drilling Capacity: Pullback: 6,000kg. Pulldown: 3,500kg. Hook load(max): 6,000kg

Mast Dimensions: Working Mast Height: 5,400mm. Working Stroke: 4,500mm

Rotary Head Performance*: Speed (max): 190rpm. Torque (max): 4,050Nm.

Circulating Swivel Unit: Internal Diameter: 51mm operating pressure(max): 600psi

Breakout Cylinder: Type:Double acting positive displacement ram. Torque to be applied to drill string (max): 18,500Nm

Main Winch*: Hoist (single line, bare drum): 2,000kg. Speed (single line, bare drum): 40m/min. Drum capacity: 57m @ 12mm

Tool Handling Winch: Hoist (single line, bare drum): 1,300kg. Speed (single line, bare drum): 15m/min. Drum capacity: 30m @ 8mm

Foam Injection Pump*: Flow rate (max):34l/m. Discharge pressure: 750psi

On Board Flush (mud) Pump*: Type: Gardner Denver 5x6 Duplex Piston Pump. Maximum Displacement: 568ltr/min 150gpm. Maximum Discharge Pressure: 21.5bar 310psi.

In Line Oiler: Fitted to assist DTH operations

Control:Hydraulic Power circuit based on load sensing, proportional valves. Drilling controls available from driller's control console.

Levelling Jacks: Two front and two rear

Rig Lighting: Fitted as standard

Maximum Drilling Depths**:

3 1/2" (13.5kg/m) drill rods: 356m

4 1/2" (23kg/m) drill rods: 209m

*other options available

**calculated from the weight of drill rods only and using 80% of the rig's pullback

Contact the seller
Watertec 6
Watertec 6
View also các dịch vụ thể loại "Khoan và sửa chữa giếng khoan, đào giếng"
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Dòng bắt buộc không được điền
Dòng điền không đúng
Dòng điền không đúng
ClearMục đã chọn: 0